NOKIA TA 1114 POWER BUTTON WAY

Nokia ta 1114 power button way.

The Power button is a button that lets you turn on your mobile phone.This is the button we use most often on every phone.Therefore, it is more likely to be damaged.Most of the Nokia keypad phones will have a bubble button.Due to its overuse, it can cause fungus.If this button does not work, you should first clean inside this button.Then turn the phone on again.If it is still not on, check if there are any connections coming to the button.

The following figure shows the connections

nokia ta1114 power button way

If the connections in this picture are not coming, jumper here.We get to buy jumper wire.Micro Iron is used for this purpose.The time of jumper wire solder should be used with flux.Then turn the phone on again.Now you can see the phone is turned on.

Comments

MIRACLE BOX 2.82 INSTALLER AND START BUTTON NOT WORKING FIXED

M iracle box 2.82 installer and start button not working fixed Here I am going to show you how to install Miracle Box 2.82 and how to fix start button not working problem.To do this, download the installation file and the handle file from the links below.Now do everything as it says.Do not open the app after installing it.There is a few things to do before that.Let’s see what it is. To do this, go to the Windows Start button and open the search bar.Then type "run" and search for it.Now open the Run application from the search information.The photo below shows a photo of this app. After opening this application, type "regedit" and press OK.This time a new window will open.The picture below shows what to type in the app and then open a new window. Now open the second option HKEY_CURRENT_USER from the new window.From the next section, open the software. Now select the folder handle and delete it.after Close this window.Now go to the desktop, right cli...

HOW TO CHANGE IMEI NUMBER IN NOKIA BASIC CHINA KEYPAD PHONES

H ow to change imei number in nokia basic china keypad phones. You can buy Chinese-made keypad phones that look like Nokia phones from the Gulf countries.If you take these phones to other countries, your SIM will not work there.It's a country lock.If necessary, we can remove the lock on the company.If it cannot, we can change the IMEI number and use it.Here is the second method.To do this, open the dialer on the mobile phone.Now, type a code here.code is *#020*# .Hitting the last digit # will open a new page.Here we can see the option to change both the IMEI number.Above will be the old IMEI number and below it will be the new section.Here, select the lower part and put the new IMEI number in our hand.You have to put the IMEI number in a very precise manner.after Click on the Select button.Then restart your phone.Now if you check the IMEI number, you will see that the IMEI Number we just released.Then enter the second IMEI number similarly.The image below shows how to do...

HOW TO MAKE A LED LIGHT FROM DAMAGED MOBILE PHONE DISPLAY

H ow to make a led light from damaged mobile phone display. We have all seen the display of the mobile phone.We can see everything in the display with the help of the led light.We can build light from these displays if the light is not damaged or damaged.In the photo below you can see two displays.There is a large strip on one display and a small strip on the other display.Here I have removed a large strip of display. Here I have removed a large strip of display.We don’t need a big strip.Here is a small strip used for lighting.This strip is solder on the large strip.We need to separate it.You can use a soldering iron for this purpose.You can see it disassembled in the photo below. When it is disassembled, the connections in it cannot be damaged.Now two wires from this little strip should be jointed.Pair it as much as you like.In the photo below you can see how the joints work. Now we have to remove the top glass of the display.For this you can use a small blade or somet...

AKBARALI TIRUR

Search This Blog