HOW TO BOOST A MOBILE PHONE BATTERY WITH POWER SUPPLY METER

How to boost a mobile phone battery with power supply battery.
First of all, Power Supply Meter is a machine used for repairing mobile phones in mobile shops .From this machine we get the output from zero voltage to 15 voltage.Below is a photo of the power supply meter and the multi meter.

Battery Boosting means Put more voltage into the battery without the voltage to work.We can use other power supply sources also for this purpose.Here we need a battery adapter to fix the battery.What I am using here is a damaged external battery charger.You can see it in the picture below.

Then connect the battery to that externel charger.Now you have to set the zero voltage on the power supply meter.Now fix the positive part of the power supply meter on the positive side of the battery.Fix the negative side similarly.Now turn on the meter.Now increase the voltage until the beep sound from the meter.This time the needle on the ampere meter can be seen moving completely.The voltage should not be set to the sound level.The only set is until the sound comes out.You can see from the picture below how it is.

After a while the needle on the ampere meter is turned back.Increase the voltage again this time.Do this until the needle is not turned back.Leave it on for a while.Now to see if there is enough voltage in the battery Reduce the voltage across.This time the digital meter of the meter will show the voltage inside the battery.The battery can now be charged on the phone if it is of sufficient voltage.If the voltage is not enough, repeat the above steps for as long as possible.

Comments

MIRACLE BOX 2.82 INSTALLER AND START BUTTON NOT WORKING FIXED

M iracle box 2.82 installer and start button not working fixed Here I am going to show you how to install Miracle Box 2.82 and how to fix start button not working problem.To do this, download the installation file and the handle file from the links below.Now do everything as it says.Do not open the app after installing it.There is a few things to do before that.Let’s see what it is. To do this, go to the Windows Start button and open the search bar.Then type "run" and search for it.Now open the Run application from the search information.The photo below shows a photo of this app. After opening this application, type "regedit" and press OK.This time a new window will open.The picture below shows what to type in the app and then open a new window. Now open the second option HKEY_CURRENT_USER from the new window.From the next section, open the software. Now select the folder handle and delete it.after Close this window.Now go to the desktop, right cli...

HOW TO CHANGE IMEI NUMBER IN NOKIA BASIC CHINA KEYPAD PHONES

H ow to change imei number in nokia basic china keypad phones. You can buy Chinese-made keypad phones that look like Nokia phones from the Gulf countries.If you take these phones to other countries, your SIM will not work there.It's a country lock.If necessary, we can remove the lock on the company.If it cannot, we can change the IMEI number and use it.Here is the second method.To do this, open the dialer on the mobile phone.Now, type a code here.code is *#020*# .Hitting the last digit # will open a new page.Here we can see the option to change both the IMEI number.Above will be the old IMEI number and below it will be the new section.Here, select the lower part and put the new IMEI number in our hand.You have to put the IMEI number in a very precise manner.after Click on the Select button.Then restart your phone.Now if you check the IMEI number, you will see that the IMEI Number we just released.Then enter the second IMEI number similarly.The image below shows how to do...

HOW TO MAKE A LED LIGHT FROM DAMAGED MOBILE PHONE DISPLAY

H ow to make a led light from damaged mobile phone display. We have all seen the display of the mobile phone.We can see everything in the display with the help of the led light.We can build light from these displays if the light is not damaged or damaged.In the photo below you can see two displays.There is a large strip on one display and a small strip on the other display.Here I have removed a large strip of display. Here I have removed a large strip of display.We don’t need a big strip.Here is a small strip used for lighting.This strip is solder on the large strip.We need to separate it.You can use a soldering iron for this purpose.You can see it disassembled in the photo below. When it is disassembled, the connections in it cannot be damaged.Now two wires from this little strip should be jointed.Pair it as much as you like.In the photo below you can see how the joints work. Now we have to remove the top glass of the display.For this you can use a small blade or somet...

AKBARALI TIRUR

Search This Blog