Skip to main content

HOW TO REPLACE DISPLAY CONNECTOR ON MOBILE PHONE MOTHER BOARD

How to replace display connector on mobile phone mother board.
Here I am going to show you how to easily replace a display connector into the motherboard of a mobile phone.To do this, first remove the damaged connector from the motherboard using the blower.If the blower cannot be used, we can use larger soldering iron.Do not damage the prints on the motherboard when removing.so remove the old connector very carefully.Then add fresh led and a little flex.
Then insert the led into each leg of the new connector as shown in the picture below.


Use Micro Iron to do this.Do not shorten between the legs.Now put the new connector on the motherboard using the Tuser.This time all the sides and legs should be very correct .Once everything is alright, use Iron on one or both legs.If one or both legs are sitting on the motherboard, slowly fix the other legs.The form of doing this is shown in the photo below.

It is best to use more flux when fixing all the legs.This is because the legs can avoid collisions.After fixing all the legs, check to see if the multi-meter continuity is present in all the legs.If you see all the legs on continuity, you can make sure the connector is OK.

































Labels:

Comments

Post a Comment

Popular posts from this blog

HOW TO MAKE A LED LIGHT FROM DAMAGED MOBILE PHONE DISPLAY

H ow to make a led light from damaged mobile phone display. We have all seen the display of the mobile phone.We can see everything in the display with the help of the led light.We can build light from these displays if the light is not damaged or damaged.In the photo below you can see two displays.There is a large strip on one display and a small strip on the other display.Here I have removed a large strip of display. Here I have removed a large strip of display.We don’t need a big strip.Here is a small strip used for lighting.This strip is solder on the large strip.We need to separate it.You can use a soldering iron for this purpose.You can see it disassembled in the photo below. When it is disassembled, the connections in it cannot be damaged.Now two wires from this little strip should be jointed.Pair it as much as you like.In the photo below you can see how the joints work. Now we have to remove the top glass of the display.For this you can use a small blade or somet...
Post a Comment
Read more

MIRACLE BOX 2.82 INSTALLER AND START BUTTON NOT WORKING FIXED

M iracle box 2.82 installer and start button not working fixed Here I am going to show you how to install Miracle Box 2.82 and how to fix start button not working problem.To do this, download the installation file and the handle file from the links below.Now do everything as it says.Do not open the app after installing it.There is a few things to do before that.Let’s see what it is. To do this, go to the Windows Start button and open the search bar.Then type "run" and search for it.Now open the Run application from the search information.The photo below shows a photo of this app. After opening this application, type "regedit" and press OK.This time a new window will open.The picture below shows what to type in the app and then open a new window. Now open the second option HKEY_CURRENT_USER from the new window.From the next section, open the software. Now select the folder handle and delete it.after Close this window.Now go to the desktop, right cli...
Post a Comment
Read more

HOW TO CHANGE IMEI NUMBER IN ALL MTK IC BASED MOBILE PHONES

H ow to change imei number in all mtk based mobile phone. we are using sp flash tool for flash mtk based mobile phones.Flashing in this tool is done in three ways.One is for download only, another for update, and another formats.If we flash the mobile using the format all +data  here, the imei number of that phone will be deleted.Then we will see that imei number is invalid.It is at this point that we are putting the new imei number using this method.You can find your phone's imei number using this code.the code is *#06#. 1.open your dialer and put the code.the code is *#3646633#*#*.When you press the last digit *, a new page will open in your mobile phone.Move to the right from here and open the next page, Connectivity.This page is shown in the photo below. Now open the cds information menu which shows the second one from here.This time you will see Phone One and Phone Two.If your phone comes with two imei number, you will be able to see this.If you only have one imei ...
Post a Comment
Read more